Package 1

Duration: 3 Days  Enroll now through the RoadrangerStore.

This course package is designed to give each technician in-depth training on the entire FS Medium-Duty Transmission drivetrain. This package includes the following courses: Eaton® Fuller® FS Medium-Duty Transmission Service Training, Master Clutch Service Training, and Failure Investigation & Analysis Service Training.

This section will increase the technician’s understanding of the basic operation of this drivetrain, gear life theory, and product lubrication requirements, while also addressing product specific failure modes. Maintenance and basic troubleshooting techniques will be discussed as well.

Upon completion of the above classroom presentation, the overhaul portion will continue into a hands-on tear down and reassembly of different components of the Medium-Duty Transmission drivetrain.

Package 2

Duration: 3 Days  Enroll now through the RoadrangerStore.

This course package is designed to give each technican in-depth training on the entire FS Medium-Duty Transmission drivetrain and to give a basic understanding of the operation and overhaul of Dana® Spicer® Heavy-Duty Drive Axles, including all DS and S Series Heavy-Duty Tandem Axles. This package includes the following courses: Eaton® Fuller® FS Medium-Duty Transmission Service Training, Dana® Spicer® Heavy-Duty Axle Service Training, and Failure Investigation & Analysis Service Training.

During the classroom portion, technicians will be exposed to the theory of operation, power flow, wheel differential systems, and an in-depth review of inter-axle differentials. Technicians will review a descriptive failure analysis section consisting of various axle components and what causes them.

During the FS Medium-Duty Transmission classroom portion, technicians will be exposed to the basic operation of the drivetrain, gear life theory, and product lubrication requirements, while also addressing product specific failure modes. Maintenance and basic troubleshooting techniques will be discussed as well.

Upon completion of the classroom presentations, the overhaul portion will continue into a hands-on tear down and reassembly of the DS-404 and the S-170/190 models using the correct tools and techniques. In addition, a hands-on tear down and reassembly of different components of the FS Medium-Duty Transmission drivetrain will take place.

Package 3

Duration: 3 Days  Enroll now through the RoadrangerStore.

This course package is designed to give each technician in-depth training on the entire FS Medium-Duty Transmission drivetrain along with a basic understanding of the operation and overhaul of the Dana® Spicer® Driveline. This includes all torque ratings of the SPL and 10 Series and includes the following courses: Eaton® Fuller® FS Medium-Duty Transmission Service Training, Dana® Spicer® Driveline Training and Failure Investigation & Analysis Service Training.

The FS Medium-Duty Transmission section will increase the technicians understanding of the basic operation of this drivetrain, gear life theory, and product lubrication requirements, while also addressing product specific failure modes. Maintenance and basic troubleshooting techniques will be discussed in detail.

During the driveline classroom portion, technicans will be exposed to the theory of operation, maintenance, and troubleshooting procedures for Spicer® drivelines and u-joints. Technicians will be instructed on the calculation of joint working angles using the Roadranger Driveline Angle Analysis (DAA) program. Technicians will also review a descriptive failure analysis section to increase their understanding of the various failure modes of a driveline, as well as which modes are covered under warranty.

Upon completion of the classroom session, the practical portion will continue into a hands-on tear down and reassembly of a driveline and u-joint using the correct tools and techniques. In addition, a hands-on tear down and reassembly of different components of the vocational transmission drivetrain will take place.