Transmission - General Information Heavy-Duty

Nomenclature - Automated

Nomenclature - Manual

Clutch Housing Weights & Availability

*No SAE NO.2 clutch housing on 13 and 18 speed models or automated 10 speeds rated 1450 lb-ft or above.
Note: No cast iron clutch housings on UltraShift 10 and 13 speed models.

Hydraulic Clutch Release Options

*Multi-Piece Hydraulic Clutch Release Design
- Aluminum clutch housing weight is 21 lbs [9.52 kg] (without Clutch Release Components)
- Aluminum clutch housing weight is 38 lbs [17.23kg] (with Clutch Release Components)
- Cast Iron clutch housing weight is 68 lbs [30.8 kg] (without Clutch Release Components)
**Integral Hydraulic Clutch Release System (effective 2nd quarter 2007)
- Clutch housing weight is 27 lbs [12.24 kg] (without Clutch Release Components)
- Clutch housing weight is 34 lbs [15.42 kg] (with Clutch Release Components)

Power Take-Off (PTO) Specifications

Notes: For PTO torque limits reference TMIB0127.
UltraShift 10 Speeds: Inertia brake is installed on 8-bolt PTO opening. A kit is available to move the inertia brake from the 8-bolt opening to the 6-bolt opening.
UltraShift 13 Speeds: Inertia brake is installed on 8-bolt PTO opening. Inertia brake cannot be moved to 6-bolt opening.
See PTO Information Guide, TRIG2600 for more information.
* Some Left Side PTO mounts are located on the bottom of the transmission.

End Yoke Lengths

Fuller® Auxiliary Transmission Specifications

* Aux C/S Pump Available