Argo-Tech Brand Engine Supplier Quality Documents

Supplier Quality Escape Notification

Quality Personnel Contact List

Mark Kuhar Supplier Quality Assurance Manager office (216) 692-5567 cell (216) 496-9586

Gregory A. Lallathin Quality Assurance Manager office (216) 692-5038 cell (216) 870-9020

In the event of a Quality Escape, the Supplier is required to contact a purchasing representative. If the cognizant purchasing agent cannot be reached, the Supplier must speak to another purchasing representative.

Supplier Quality Documents Downloads

Quality Control Procedures (QCPs)

QCP 2.4 - Visual Acuity Requirements For Visual Evaluation Rev. Y	4/12/10	107 KB
QCP 5.0 - Control of Purchases Rev. P	3/16/11	54 KB
QCP 5.3 - Receiving Inspection Procedure Rev. AC	9/9/10	82 KB
QCP 5.4 - Source Inspection Rev. T	12/11/08	60 KB
QCP 5.5 - Certified Supplier Program Rev. H	12/5/11	143 KB
QCP 5.8 - Quality Requirements for Suppliers and Subcontractors Rev. AH	4/4/11	121 KB
QCP 5.8.2 - Supplier Packaging Specification Rev. D	3/7/07	74 KB
QCP 15.1 - Acceptance Sampling Inspection Rev. Z	5/5/10	225 KB
QCP 21.0 - Software Quality Assurance Program Rev. H	1/12/07	80 KB

Standard Operating Practices (SOPs)

SOP52-08-0000-00-017 - Supplier Fluorescent Penetrant Inspection Rev. J	10/3/08	119 KB
SOP52-08-0000-00-038 - General Workmanship Standard for Castings Rev. D	5/5/09	65 KB
SOP52-10-005.0-00-001 - Sample Casting Approval Rev. N	1/20/09	166 KB
SOP52-10-005.1-00-001 - Supplier Rating System Rev. H	9/24/08	115 KB
SOP52-10-005.2-00-004 - Single Supplier Procuremnt Rev. G	8/20/08	94 KB
SOP52-10-005.8-00-001 - Requirements for Suppliers for Prevention of Foreign Object Damage to Flight Hardware Rev. A	5/8/09	86 KB
SOP52-10-007.0-00-004 - First Article Inspection Requirements for Aircraft Accessories Purchased Parts (Excluding Forgings And Castings) Rev. L	11/13/08	122 KB
SOP52-10-009.1-00-001 - Age Control of Synthetic Rubber Parts Rev. U	8/24/09	63 KB

Approved Special Processors

SPL file	2/28/12	53 KB